Simple to use USB to serial base unit for XBee modules. It works with all XBee modules including the Series 1, 2 and Series 2.5, standard and Pro versions. Plug the module to any standard USB Type A connector and it does not require any external cables or converters.
To program Xbee type Zigbee radios, you don’t need any hardware changes. The Reset switch is placed on the bottom side of the device. You might require to press the reset switch when resetting the device to factory defaults, firmware updates or programming parameters to the Xbee radio.
3-LED indicators are placed for users to detect any errors quickly. STATUS LED (Green) will light up if the Xbee is connected properly. ASSOCIATE LED (Amber) will blink if the Xbee radio is configured to accept any associations. DATA LED (RED) will toggle everytime a data byte is received or transmitted from the device.
1. You will require FTDI USB driver in order to access the module from a PC. Please download the appropriate driver from http://www.ftdichip.com/Drivers/VCP.htm (If you have installed Arduino, the driver is already installed and ready to go)
2. Xbee Module is sold separately.
*** 10% of all proceeds will be donated to disaster relief in Japan ***
|Open Source||Hardware||Docs & Files||Software|
|Open Source Hardware Definition v1.0||Creative Commons - Attribution - ShareAlike 3.0||Creative Commons - Attribution - ShareAlike 3.0||Creative Commons - Attribution - ShareAlike 3.0|
|Destination & Service||Shipping Time||Cost|
|Worldwide - Standard||7-14 Business Days||$6.50 for first item, $0.50 for each additional item|
|Worldwide - Express||3-5 Business Days||$25.00 for first item, $2.00 for each additional item|
InMojo supports the Open Source Hardware Definition v1.0