RPi900 is a long-range radio interface board for the Raspberry Pi. Combined with a $70 DNT900 radio transceiver from RFM, it provides a cheap, powerful solution for any project requiring long-range, wireless data transmission.
For full details and tutorials, visit the RPi900 product website at http://rpi900.com.
RPi900 comes mostly assembled. Depending on the configuration you need, you will need to solder one or more through-hole connectors. The items you will receive are shown in the last gallery image. (Due to postal restrictions, I cannot provide a CR1220 coin cell, needed if the real-time clock is used.)
Please note: RPi900 is designed for the original model B Raspberry Pi, however by soldering two additional jumper wires and a longer header socket, it can be made to work with the newer Raspberry Pi models B+, A+, 2 and 3. (See the RPi900 website for details.)
Standard shipping is by airmail and should take 3-10 business days for most addresses. Unfortunately, no tracking is available. For orders of more than two boards, each pair of boards will be sent in a separate parcel.
International express shipping is quoted by Australia Post as 2-4 business days. A tracking number is provided in this case. (However the delivery target is not always met, and I don't recommend express shipping as particularly good value for money.)
|Open Source||Hardware||Docs & Files||Software|
|Open Source Hardware Definition v1.0||Creative Commons - Attribution - ShareAlike 3.0||Creative Commons - Attribution - ShareAlike 3.0||N/A|
|Destination & Service||Shipping Time||Cost|
|Worldwide - Standard||7-14 Business Days||$8.00 for first item, $8.00 for each additional item|
|Worldwide - Express||3-5 Business Days||$35.00 for first item, $0.00 for each additional item|
|Domestic (Australia) - Standard||3-7 Business Days||$3.00 for first item, $3.00 for each additional item|
Hello and good day. Does this unit broadcast in 2.4 and or 5.8 ghz and is it possible to use this as a stack with other PI hats such as the Navio2?
if i want to telemetry remote my raspberry pi having the dtn900p from my pc , what other tool do i need?
another dtn900p board usb attached to my computer???or else???
can i use this with banana pi and nanopi T3 or lattepanda ? any library for these board and tutorials??
i see you say i need DTN900P radio module ....what are these for ? can you explain / tutorials thanks
can i telemetry remote ?
I don't need the raspberry Pi, just the carrier bird and the chip. Is that the "two boards mostly assembled" order?
InMojo supports the Open Source Hardware Definition v1.0